Protect ink with PP(laminating).
Material where the ink printed. There are a paper type and a vinyl type.
It has different waterproof and durability function according to materials.
Stickers adhesive get stronger according to time pass. It has normal and strong adhesive option.
Where the adhesive applied on a material.
Please ensure that you have checked through our artwork guidelines below and your artwork is ready for print. This is so we can ensure your artwork is printed correctly, with exceptional results. If you are unsure about whether or not your artwork is ready, please feel free to contact us for further assistance.
Our preferred file format is PDF file which is an industry standard, so We recommend all artwork to be supplied as PDF.However We acceptance the following file Formats: Recommended File formats : PDF, AI, PSD, EPS files
All files must be in CMYK mode. Any file provided in RGB mode will be converted into CMYK mode before print and it may look slightly less vibrant on your screen.
6 pt font size is required for adequate legibility.
Fonts vary based on weight, color, and style. Certain fonts can be made smaller than others. (minimum font is 6pt if foil sticker)
CMYK vs RGB vs Spot Color (PMS)
In the graphic design profession there are three main colour models used for design depending on the application: CMYK, PMS and RGB
We recommend you to check overprint preview for every project, even though you don’t use overprint intentionally, to see if everything looks the way you intended. Incorrect use can produce unwanted results. We will not be responsible for misuse of the Overprint function.
The minimum resolution we recommend for print is 300 dots per inch (300dpi) at final size.
Please note that if your image is in a lower dpi, converting it to 300dpi using a tool will not actually increase the resolution.
Please make sure that the actual image is originally created at 300dpi. Some designs may require a higher DPI.
By converting fonts to outlines in programs like Illustrator and Photoshop, you will avoid font issues such as missing fonts or missing text.
When converting text to outlines, the font becomes a ‘shape’ and will look no different than its original font. This way we can print them as you intended them to appear on your product.
Stroke width must be a minimum of 0.25pt. If it is too fine, it may not visible on the final product even though it is visible on the screen.
Sate Area, Trim and Bleed
It must be 2mm in from the trim lines.
Trim lines are the finished size of the product.
The document will be cut close to trim lines however the actual cut can happen anywhere between the bleed area and the safe area.
Therefore it is very important to keep your texts and images within the safe area.
The very edges of the document are called the bleed area.
You must supply your artwork (excluding business cards and stickers) with a 2mm bleed area all around and ensure that your artwork and background colour extend into the bleed area, all the way to the edge.
Before submitting your artwork, please check that:
- Preferred file formats: PDF, AI, PSD, EPS
- Maximum file size: 10 MB
- 2mm bleed
- Artwork to be 1-up on a single page document.
- All fonts are outlined (converted to curves) or embedded.
- All images in your artwork are 300dpi when placed at 100%
- Nominate all colours as CMYK or Pantolnes (PMS)
1. If two sides are selected, your artwork should contain a design for both sides.
2. Also if possible, please provide crop marks around the artwork.
3. Colours may appear darker when Matt Lamination is applied.
4. We print in CMYK and not RGB. Supplying artwork in RGB will effect the final colour.
5. If business cards are ordered with any additional option, a PDF proof will always be sent to the customer. This must be approved before the job can be printed. If not approved in time, the order may be delayed.